Christensen Arms Traverse 22-250 Rem, 24″ Threaded Barrel

The Christensen Arms Traverse 22-250 Rem, 24″ Threaded Barrel is a factory-built precision bolt action that splits the difference between a backcountry lightweight and a range-ready tack driver. At 7.3 pounds with a carbon fiber-wrapped stainless barrel and a TriggerTech trigger, it delivers sub-MOA accuracy out of the box, backed by Christensen Arms’ guarantee. Chambered in 22-250 Rem, this rifle runs flat trajectories and low recoil, making it a viable option for varmint hunting and steel ringing out past 500 meters.

Manufacturer	Christensen Arms
Model	Traverse
Material	Carbon fiber-wrapped stainless steel barrel, synthetic stock
Compatibility	22-250 Remington (standard bolt face)
Finish	Matte black Cerakote receiver, carbon fiber barrel
Weight	7.3 lb (per manufacturer specs)
Condition	New

Key Features

• Carbon Fiber-Wrapped Stainless Barrel: The 24″ barrel reduces weight by roughly 30% compared to a full steel contour of the same profile, so your rifle stays under 8 pounds without sacrificing stiffness or heat dissipation. Why it matters: less fatigue on long stalks means you can carry more gear and still get consistent cold-bore shots.
• TriggerTech Trigger: Factory-adjustable from 2.5 to 5.0 lb, this trigger breaks clean and crisp with zero creep. Why it matters: a consistent trigger break is the cheapest accuracy upgrade you can make, and this one comes installed from the factory.
• Integrated 0-MOA Picatinny Rail: Machined directly into the receiver, this rail gives you a solid foundation for mounting a scope without any aftermarket base. Why it matters: eliminates one more potential point of failure or misalignment, especially important when you’re bedding a scope for long-range work.
• Removable Side-Baffle Muzzle Brake: Threaded 5/8-24 with a side-port brake that reduces felt recoil by an estimated 40% per Christensen Arms. Why it matters: 22-250 is already mild, but the brake lets you spot your own impacts without the rifle jumping off the bag.
• Bottom Picatinny Rail: A short rail under the fore-end allows you to attach a bipod or a sling mount without drilling or tapping the stock. Why it matters: keeps your bipod rigid and repeatable, critical for consistent positional shooting.

Who It’s For

The Traverse is built for the shooter who needs one rifle that can pull double duty: a lightweight backcountry rig for coyote hunting and a precision rifle for range days. If you’re the kind of shooter who measures groups in MOA and wants a factory gun that doesn’t need a barrel swap to shoot half-inch groups, this is your platform. It’s also a solid entry for someone stepping up from a budget bolt action to a premium carbon-fiber build without jumping to a custom action.

Pros & Cons

• Pro: Sub-MOA guarantee out of the box — I’ve seen these rifles print consistent .7–.9 MOA with factory 55-grain loads.
• Pro: 7.3 lb weight with a 24″ barrel makes it easy to carry all day and still stable enough to shoot off a pack.
• Con: The factory stock has a fairly short length of pull (13.5″), which may require an aftermarket spacer for taller shooters. It’s a minor ergonomic trade-off for the weight savings.
• Con: The 0-MOA rail limits your elevation travel if you plan to dial past 600 yards with a high-base mount; you may need a 20-MOA rail for extended range work.

Comparison

Feature	Christensen Arms Traverse	Bergara B-14 HMR	Tikka T3x Lite
Barrel	Carbon fiber-wrapped stainless, 24″	Steel, 22″	Steel, 22.4″
Weight	7.3 lb	9.5 lb	6.4 lb
Trigger	TriggerTech, 2.5–5 lb adjustable	Bergara stock, 3–4 lb adjustable	Tikka single-stage, ~3 lb adjustable
Muzzle Brake	Removable side-baffle (included)	None (threaded)	None (threaded)
Price	$2,549.99	~$1,100	~$800
Sub-MOA Guarantee	Yes	No (factory accuracy not guaranteed)	No (sub-MOA typical but not guaranteed)

The Traverse sits above the Bergara and Tikka in price, but you’re paying for the carbon barrel and the factory accuracy guarantee. If you want a lightweight rig without aftermarket upgrades, the Traverse is the better choice. If budget is primary, the Bergara or Tikka will still shoot well but will need a brake and possibly a barrel swap to match the Traverse’s weight.

FAQ

What is the barrel twist rate on the Christensen Arms Traverse 22-250?

The factory twist rate is 1:12″, which stabilizes 50–60 grain bullets well. If you plan to shoot heavier 69–77 grain projectiles, you may see degraded accuracy past 300 yards.

Does the Christensen Arms Traverse come with a scope base?

Yes, it includes an integrated 0-MOA Picatinny rail machined into the receiver. You can mount standard 1913 rings directly without an aftermarket base.

Is the Christensen Arms Traverse available in left-hand configuration?

As of this writing, Christensen Arms offers the Traverse in right-hand only. If you’re a left-handed shooter, you’ll need to look at the Bergara B-14 or Tikka T3x in left-hand.

What is the thread pitch on the barrel?

The barrel is threaded 5/8-24, standard for .22-250 and .308 class rifles. The included side-baffle brake threads on directly, and you can suppress it with a direct-thread or QD mount in the same pitch.

✔ Nationwide delivery (all 50 states)
✔ Ships 1-2 business days
✔ 30-day returns
✔ Secure checkout

Browse more precision bolt actions in our Bolt Action Rifles category, or check out Precision Rifles for similar builds. For optics-ready options, see Optics-Ready Rifles.

Last updated: April 2026